25-100W Roadway Light Series



Product Description

The PRL LED Roadway Light distills the benefits of the latest in LED technology into a high performance, high efficacy, long-life luminaire. The outstanding photometric performance results in sites with excellent uniformity, greater pole spacing and lower power density.

The PRL LED Series is the better alternative for traditional street and area lighting with quick payback and improved performance.


  • Tool-less entry, Designed with 0-10V dimming capabilities. Controls options available
  • Die cast aluminum housing with two-bolt bracket mounts to 1-1/4” to 2” (1-5/8” to 2-3/8” O.D.) diameter mast arm bracket available as an option. Leveling adjustment from ± 5°
  • Power Distribution Terminal Block Board can be used the wire of 6-16AWG
  • Requires ANSI 3-wire, ANSI 5-wire or ANSI 7-wire Photocontrol Receptacle option
  • Photocontrol (PE) requires 100-277V, 347-480V voltage or shorting cap option
  • Small Four Point Mounting-Mounts to 1.25" (32mm) IP, 1.66"(42mm) O.D. horizontal tenon / Large Four Point Mounting-Mounts to 2" (51mm) IP, 2.375"(60mm) O.D. horizontal tenon - Available as a separate accessory
  • Minimum 4KV surge rating. When ordering the SPD option, a separate surge protection device is installed within the luminaire which meets a minimum Category C Low (per ANSI/IEEE C62.41.2)
  • Precision-molded proprietary acrylic lenses provide multiple photometric distributions tailored specifically to building mounted applications
  • Features an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion
  • Power Distribution Terminal Block Board can be used the wire of 2-14 AWG(2.0-22mm2)

Electrical System

  • Input Voltage: 100-277V or 347-480V, 50/60Hz
  • Power Factor: >0.9 at full load
  • Total Harmonic Distortion: <20% at full load
  • Integral 10kV surge suppression protection standard
  • Luminaire is qualified to operate at ambient temperatures of -40°C to+50°C

Regulatory & Voluntary Qualifications

  • UL Listed. Suitable for wet locations
  • Certified to ANSI C136.31-2001, 3G vibration standards
  • 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2
  • Meets FCC Part 15 standards for conducted and radiated emissions
  • Luminaire and finish endurance tested to withstand 3,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
  • Dark Sky Friendly, IDA Approved
  • RoHS compliant. Consult factory for additional details
  • DesignLights Consortium ®(DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified

  • PRL LED Roadway Light Product photo

Performance Summary